Large enough to serve you… small enough to care.

24/7 SUPPORT

CALL US

469-496-5845

Furnace Repair: Understanding Your Furnace

Understanding Your Furnace

For homeowners in the Dallas-Fort Worth area, a reliable furnace is essential to staying comfortable during chilly winter months. However, like any mechanical system, furnaces require maintenance and occasional repairs. Understanding the key components of your furnace and the common reasons for repairs can help you better maintain your system and recognize when to call Chapman Air & Heat for professional assistance.

Key Components of a Furnace

A furnace is a complex system made up of several critical parts, each with a specific role in heating your home:

  • Thermostat
    The control center of your furnace, the thermostat regulates temperature by signaling the system to turn on or off based on your settings.
  • Burners
    These produce the heat by igniting fuel, such as natural gas, and transferring it to the heat exchanger.
  • Heat Exchanger
    This component transfers heat from the burners to the air while keeping harmful combustion gases separate.
  • Blower Motor and Fan
    The blower motor powers the fan, which circulates warm air throughout your home via ductwork.
  • Pilot Light or Igniter
    Older furnaces use a pilot light to ignite the burners, while modern units often rely on electronic igniters for better efficiency.
  • Flue or Vent Pipe
    The flue directs combustion gases safely out of your home to prevent carbon monoxide buildup.
  • Filter
    The air filter captures dust, debris, and allergens to maintain air quality and protect the system from clogs.
  • Control Board
    Acting as the brain of the furnace, the control board manages operations and communicates with other components.
  • Limit Switch
    A safety device, the limit switch prevents the furnace from overheating by turning off the burners when necessary.

Common Reasons Furnaces Need Repairs

Furnaces are built to last, but wear and tear, environmental factors, and lack of maintenance can lead to issues. Here are some of the most common reasons repairs are necessary:

  • Dirty or Clogged Filters
    A clogged filter restricts airflow, causing the furnace to overwork and potentially overheat, leading to higher energy bills and premature wear.
  • Ignition Problems
    Pilot lights can go out due to drafts or faulty thermocouples, while electronic igniters can fail due to electrical issues.
  • Cracked Heat Exchanger
    A damaged heat exchanger can pose serious risks, including carbon monoxide leaks. Cracks often result from age or poor maintenance.
  • Blower Motor Issues
    Overheating, worn belts, or electrical malfunctions can cause the blower motor to fail, leaving your home without warm air circulation.
  • Thermostat Malfunctions
    If your thermostat isn’t working correctly, the furnace might not turn on or maintain the desired temperature.
  • Blocked Flue or Vent Pipe
    Debris, birds’ nests, or ice can block the flue, causing dangerous gases to accumulate inside your home.
  • Worn-Out Bearings and Belts
    Over time, these mechanical components wear out, leading to squealing noises and inefficient operation.
  • Electrical Problems
    Issues with wiring, fuses, or the control board can prevent the furnace from running properly.
  • Overcycling
    A furnace that turns on and off frequently (short cycling) may have an issue with the thermostat, airflow, or even its size relative to the home.
  • Lack of Maintenance
    Skipping annual tune-ups can lead to undetected issues that eventually cause breakdowns or reduce efficiency.

Before calling Chapman Air & Heat:

  1. Check that the filter is not clogged or dirty. 
  2. Check the exhaust vent outside to be sure it is not blocked  (bird nest etc.)
  3. Check that the thermostat is not indicating the need for a battery replacement. 
  4. Check that the switch for the furnace is on and that the circuit breaker has not tripped to the off position (breakers usually only go about half way when tripped, so it may not be obviously in the fully off position)

Why Choose Chapman Air & Heat for Furnace Repairs?

At Chapman Air & Heat, we understand how critical it is to keep your home warm and safe during winter. Our experienced technicians are trained to handle all types of furnace repairs, from routine fixes to emergency breakdowns. When you choose us, you can expect:

  • Fast and reliable service
  • Transparent pricing with no hidden fees
  • Expert advice to prevent future issues
  • A commitment to your comfort and safety

Don’t let furnace problems leave you out in the cold. Contact Chapman Air & Heat today for professional repair services and ensure your system runs efficiently all winter long.

More Articles
Top Reasons To Get Professional HVAC Help

Top Reasons To Get Professional HVAC Help

When it comes to maintaining a comfortable home environment, the importance of a heating, ventilation, and air conditioning (HVAC) system cannot be overstated. However, when

HVAC FQA

What Questions Should I Ask About HVAC?

When it comes to our home comfort, HVAC systems (Heating, Ventilation, and Air Conditioning) are unsung heroes that work diligently behind the scenes. They regulate

Air Conditioning Repair & Heating Service

PROMPT, PROFESSIONAL SERVICE BY CERTIFIED AND EXPERIENCED TECHNICIANS

Trane Premium HVAC Warranty

Premium HVAC Warranty Plan

You pay no deductible on Trane Service or Parts when you sign up for our Premium Warranty.

Notice

We will be closed Friday, January 10th and will reopen on Monday, January 13th. However, we remain available for emergency no-heat calls during this time. Our on-call team is ready to assist, ensuring you stay warm and comfortable.

Thank you for your understanding!

Explore Our Coupons & Start Saving Today!